Article ID : 00008380 / Last Modified : 08/16/2015

Unable to use the One Touch feature to record from VHS to DVD.

Applicable Products and Categories of This Article

NOTE: Each of these steps represents a possible solution to this issue, check the One Touch functionality of the device after completing each step.

  1. Ensure that the VHS tape is not copy-protected.
  2. Ensure that a blank DVD is being used.
  3. Ensure that the input of the recorder is set to either Line 1 or Line 2.

NOTE: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.