Article ID : 00011202 / Last Modified : 04/06/2015

Unable to install the Sony Wall Mount Bracket SU-WL500 to the KDL60NX800.

Applicable Products and Categories of This Article

Use the screws and spacers provided with the TV to secure the wall mount bracket.

NOTE: If the screws and spacers have been misplaced, contact Sony® Parts and Accessories Sales to see if a replacement set is available for purchase. Go to Parts and Accessories.  

  1. Remove the bottom cover and the terminal cover.

    Image

  2. Remove screws before installing wall-bracket (as shown below)

    NOTE: The screws and spacers mentioned in the step below are provided in the TV accessory bag.

    image

  3. Place one Spacer on each opening in the rear cover.

    image

  4. With the Spacers in place, install the wall mount bracket.

    Image

  5. Attach the wall-mount using the supplied four spacers and four M6 x 20 screws.

    Image