Article ID : 00011474 / Last Modified : 05/11/2015

The volume is not loud enough.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

The volume may not be loud enough if the Automatic Volume Limiter System (AVLS) feature is set to AVLS ON. The AVLS function limits the maximum volume level in order to protect listeners hearing. The factory default setting for the AVLS function is on.

Follow this procedure to turn the AVLS feature on or off.

IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.

Turn AVLS on

  1. Unite the left and right parts to turn off the player.
  2. Separate the left and right parts.
  3. Press and hold the jog lever for about 5 seconds while pressing the VOL+ button, until the status lamp lights.

    NOTE: The status lamp turns off when you release the jog lever and the VOL+ button. The OPR lamp blinks red 2 times and AVLS is set to AVLS OFF.

Turn AVLS off

  1. Unite the left and right parts to turn off the player.
  2. Separate the left and right parts.
  3. Press and hold the jog lever for about 5 seconds while pressing the VOL+ button, until the status lamp lights.

    NOTE: The status lamp turns off when you release the jog lever and the VOL+ button. The OPR lamp blinks green 2 times and AVLS is set to AVLS On.