Article ID : 00016962 / Last Modified : 11/04/2011

How do I connect the personal 3D viewer to a home audio system?

Applicable Products and Categories of This Article

How to connect the viewer to a 3D-ready home audio system:

  1. Connect the HDMI output of the audio system to the HDMI IN input of the viewer using the HDMI® cable supplied with the viewer.
  2. Connect the HDMI OUT output of the viewer to the HDMI IN input on the television or display monitor using a commercially available High-Speed HDMI cable.

    NOTE: Make sure to configure audio output setting on the home audio system so that audio signal is sent to the viewer.

How to connecting the viewer to a non-3D home audio system:

  1. Connect the HDMI output of a Blu-ray Disc™ (BD) player or game console to the HDMI IN input of the viewer using the HDMI cable supplied with the viewer.
  2. Connect the HDMI OUT output of the viewer of the viewer to the HDMI IN input of the audio system using a commercially available High-Speed HDMI cable.

NOTES:

  • If the audio system does not support a HDMI connection, it will not support the viewer.
  • Make sure to set the HDMI pass-through setting to On from the General Setup menu of the viewer.