Article ID : 00017478 / Last Modified : 05/15/2015

The aperture value or shutter speed flashes when you press the shutter button halfway down.

Applicable Products and Categories of This Article

If the subject is too bright or too dark, it is beyond the available range of the camera. The camera judges that the proper exposure is not obtained. Adjust the setting again.

Aperture Priority: The shutter speed is automatically adjusted to obtain proper exposure. Use the control dial of the camera to change the fstop.

Image

Shutter Priority: The aperture is automatically adjusted to obtain proper exposure. Use the control dial of the camera to change the shutter speed.

Image

IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.