Article ID : 00019300 / Last Modified : 03/21/2018

HDMI OUT A or HDMI OUT B Doesn't Work

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Follow the steps below to check the HDMI OUT of the receiver:

  1. Connect the HDMI® cable to another HDMI device.
  2. On the supplied remote control of the receiver, press the HDMI OUTPUT button to select HDMI OUT (A/B/A+B/OFF).
    • Some receivers have an HDMI OUT button that you may press. Check your manual for model-specific information. Manuals are posted on your model support page.
    • Each time you press the button, the output will be switched as follows:

      HDMI OUT

    • Some models give you the option of either A or B, not both.