Article ID : 00021652 / Last Modified : 02/17/2016

How to assign the functions on the custom keys on the camera.

Applicable Products and Categories of This Article

To assign the functions to the custom keys, follow the steps below:

  1. Power on the camera.
  2. Press the Menu button.
  3. Select Setup and go to the Custom settings.
  4. Press the Center button on the control wheel to enter Custom settings menu.
  5. Select the functions to be assigned.

    IMPORTANT: Soft key C setting must be set to Custom. Otherwise, custom 1 to 5 will be grayed out.

  6. Assign the desired settings to each custom set by pressing the center button.
  7. After assigning all the functions for each custom set, press the Menu button to exit settings.

    IMPORTANT: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.