Article ID : 00022544 / Last Modified : 08/16/2015

How to transfer pictures from the camera to a computer using a standard USB connection with the Camera and Scanner Wizard in the Microsoft® Windows® XP operating system.

Applicable Products and Categories of This Article

IMPORTANT: This procedure must be performed while logged in as Administrator or to an account with Administrator rights.

  1. Turn on the computer.
  2. Turn on the camera.
  3. Insert the recording media containing the pictures into the camera.
  4. Connect the camera to the computer using the USB cable that was provided with the camera.

    IMPORTANT: Connection through a USB hub or other USB device, such as a printer or keyboard, is not supported and cannot be guaranteed. Connect the camera directly to a USB port on the computer.

    NOTE: After connecting the camera to the computer, the Camera & Scanner Wizard should automatically open. If it does not, start the Camera and Scanner Wizard manually to transfer the pictures.

  5. In the open window on the computer desktop, click the Copy pictures to a folder on my computer using the Camera or Scanner Wizard icon, and then click the OK button.
  6. In the Scanner and Camera Wizard window, click the Next button.
  7. Under Choose Pictures to Copy , click to select the desired images to copy.

    NOTE: Selected images will be marked with a green check mark.

  8. Click the Next button.
  9. Under Picture Name and Destination , under Type a name for this group of pictures , type a name for the folder where the pictures will be stored.

    NOTE: The location under Choose a place to save this group of pictures will automatically add the new folder name that was just entered.

  10. Click the Next button.
  11. Under Copying Pictures , the images are now being copied to the computer.
  12. After all images have transferred, under Other Options , click to select Nothing, I'm finished working with these pictures , and then click the Next button.
  13. Under Completing the Scanner and Camera Wizard , click the Finish button to display the images that were transferred.