Article ID : 00022762 / Last Modified : 08/16/2015

How to reset the remote control.

Applicable Products and Categories of This Article

Follow this procedure to reset the Digital Satellite System (DSS) remote control.

  1. On the remote control , remove the batteries .
  2. Press and release each button on the remote control two times.
  3. Install new alkaline batteries.
  4. IMPORTANT:

    • Do not use rechargeable batteries.
    • Ensure the batteries are properly inserted by matching the polarity on the batteries with the PLUS (+) and MINUS (-) symbols in the battery compartment.
  5. Replace the battery cover .
  6. Ensure there are no obstructions between the satellite receiver and the remote control .
  7. Ensure that none of the buttons appear to be stuck.
  8. NOTE: It may be necessary to program the remote control to operate other components. Refer to the satellite receiver instruction manual for the specific procedure.