Article ID : 00023178 / Last Modified : 03/05/2012

How to reinstall the USB drivers from the OpenMG™ Jukebox 2.2 software installation CD.

Applicable Products and Categories of This Article

Follow this procedure to reinstall the USB drivers from the OpenMG Jukebox 2.2 software installation CD.

  1. Insert the OpenMG Jukebox CD into the CD/DVD drive.
  2. In the OpenMG window, click Exit .
  3. Click Start, point to Settings, point to Control Panel, and click System.
  4. In the System Properties window, click the Hardware tab.
  5. On the Hardware tab, click the Device Manager button.
  6. In the Device Manager window, under the Unknown Device entry, double-click Net MD.
  7. In the Properties window, click the Driver tab.
  8. On the Driver tab, click the Update Driver button.
  9. In the Upgrade Device Driver Wizard window, click the Next button.
  10. In the Install Hardware Device Drivers window, click to select Display a list of the known drivers....
  11. Click the Next button.
  12. In the Select a Device Driver window, click the Browse button.
  13. Click the Open button.
  14. In the Install From Disk window, click OK.
  15. In the Select a Device Driver window, click the Next button.
  16. In the Start Device Driver Installation window, click the Next button.
  17. In the Completing the Upgrade Device Driver Wizard window, click the Finish button.
  18. Close any remaining open windows, and then restart the computer.

IMPORTANT: Information regarding upgrading to the latest version of Sony's music management software is available at the Sony Support Web Site at http://esupport.sony.com