Article ID : 00024704 / Last Modified : 02/28/2008

How to reset the Integrated Remote Commander® to factory settings.

Applicable Products and Categories of This Article

Follow this procedure to reset the remote control to factory settings.

  1. Open the battery compartment on the remote control.
  2. Remove one of the batteries.
  3. Simultaneously press and hold the CHANNEL MINUS (-) and VOLUME MINUS (-) buttons.
  4. While holding the CHANNEL MINUS (-) and VOLUME MINUS (-) buttons, reinsert the battery.
  5. After the battery has been reinserted, release both buttons.
  6. NOTE: The LCD will display the transmitting icon and OK .

  7. Press any button.
  8. NOTE: The transmitting icon will disappear and only OK will remain in the LCD.

  9. Remove one of the batteries for 15 seconds.
  10. Reinsert the battery.