Article ID : 00024836 / Last Modified : 08/16/2015

Unable to program the remote control to operate a Digital Network (TiVo®) Recorder.

Applicable Products and Categories of This Article

To program the remote control to operate a Digital Network (TiVo®) Recorder™ (DNR), one of the component select buttons must be assigned to the DNR. Follow these steps to assign a component select button.

  1. On the remote control, press the SET button.
  2. Press the component select button to be assigned to operate the DNR.
  3. While pressing and holding the PLAY button, press the 9 button.
  4. Program the remote control for the specific manufacturer.