Article ID : 00026252 / Last Modified : 07/19/2012

How to select a flash mode.

Applicable Products and Categories of This Article

Follow this procedure to select a flash mode.

  1. Turn on the digital still camera.
  2. On the digital camera, press and hold the FLASH [FIG. 1] button.
  3. While holding the FLASH button, turn the COMMAND DIAL [FIG. 1] to select the desired flash mode [FIG. 2] .

    NOTES:

    • The flash will operate when the camera is in Multi Bust, Burst, or Exposure Bracket mode.
    • Select Auto (no indicator) to have the camera flash only when lighting conditions are not adequate.
    • Select Forced flash [FIG. 3] to use the flash regardless of the lighting conditions.
    • Select Slow synchro [FIG. 3] to use the flash regardless of the lighting conditions and lower the shutter speed.
    • Select No Flash [FIG. 3] to turn off the flash.