Article ID : 00029790 / Last Modified : 02/17/2016

How to reset or initialize the camera.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

NOTE: This procedure will reset the camera to original factory settings. It will be necessary to set the date and time before using the camera.

  1. Turn on the camera.
  2. On the back of the camera, press the MENU button.
  3. Using the control button, press the RIGHT ARROW to select SETUP.

    NOTE: If the SETUP option does not appear when pressing the MENU button, press the LEFT ARROW on the control button until SETUP appears.

  4. Press the UP ARROW to select SETUP 1.
  5. Press the DOWN ARROW to select Initialize.
  6. Press the RIGHT ARROW.
  7. Press the UP ARROW to select OK.
  8. At the Initialize all settings Ready? screen, press the UP ARROW to select OK.
  9. Press the CENTER of the Control button to initialize the camera.