Article ID : 00030088 / Last Modified : 08/16/2015

The LCD projector is displaying a ghost image of the original picture.

Applicable Products and Categories of This Article

Ghosting of an image on the projector can be caused by bad cables or poor connections.

NOTE: An inferior cable can effect the picture display of the projector.

  1. Verify that the LCD and fifteen pin D sub cable connection are not being used at the same time.
  2. Verify that the supplied fifteen pin D sub high density cable is working correctly with the projector.
  3. Verify that if an extended cable connection is used that the cable is high density.