Article ID : 00032428 / Last Modified : 11/02/2018

Can the aspect ratio be changed to 4:3 or 16:9?

Applicable Products and Categories of This Article

Yes, follow the steps below to resolve this issue.

IMPORTANT: A Tension Regulator will be needed to perform this solution.

NOTE: The menu setting for Aspect Ratio is only available in the VPH V20U model projector. Any other VPH model will need to be changed on the internal D card.

1. Open the projector panel with the CRT guns facing away.

2. Locate the card on the right, which is the D card.

NOTE: The D card has controls for each color.

3. Adjust the Green Size with a tension regulator until the correct aspect ratio is displayed.