Article ID : 00032592 / Last Modified : 09/29/2016

How to perform a power reset on the Digital Network Recorder.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Follow this procedure to perform a power reset on the Digital Network Recorder (DNR).

  1. Turn off the DNR.
  2. Unplug the AC power cord for the DNR from the electrical wall outlet.
  3. Wait 15 seconds.
  4. Plug the AC power cord directly into the electrical wall outlet.
  5. Turn on the DNR.