Article ID : 00046970 / Last Modified : 01/22/2015

The LED on the front of the TV flickers when watching 3D.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

The flickering can be stopped by changing the Illumination LED setting on the TV to Simple Response or Off.

NOTE: If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product. Manuals are posted on your model support page.

  1. Using the supplied remote, press the HOME button.
  2. Select Settings.
  3. Select System Settings.
  4. Select General Set-up.
  5. Select Illumination LED.
  6. Select Simple Response or Off.