Article ID : 00123482 / Last Modified : 07/09/2015

Error: Accessory not supported is displayed when using the ECM-W1M microphone.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

This error message will be displayed on the camera's LCD when the camera is not set to Movie Mode before connecting an ECM-W1M microphone. To resolve the issue, follow the steps below:

  1. Turn off the camera.
  2. Set the mode dial of the camera to Movie Mode.
  3. Attach the ECM-W1M microphone.
  4. Turn on the camera and start recording a video.