Article ID : 00142189 / Last Modified : 02/05/2016

Some multi-channel LPCM files are being output by the Blu-ray Disc Player as 2 channel.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

Only 5.1 and 7.1 channel LPCM (.wav) files are fully-supported by the Blu-ray Disc® Player. LPCM files with 3, 4 and 5 channel can be played back, but will be output as 2 channel.