Article ID : 00148347 / Last Modified : 01/03/2018

How to connect the portable projector to the Internet via wireless access point or router.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

  • A connection between the projector and wireless access point or router is needed in the following situations:
  • When projecting photos or movies in the smartphone.
  • When operating the poster.
  • When updating the software of the unit.
  • When setting the language for the projector.

To connect the portable projector to the Internet via wireless access point or router for the first time, follow the steps below.

  1. Connect the smartphone to the wireless access point or router.
  2. Start the Portable Ultra Short Throw Projector app on the smartphone.
  3. On the Portable Ultra Short Throw Projector app, tap the Settings button.
  4. Tap Network.
  5. Tap Wi-Fi.
  6. Tap Connect.

    NOTES:

    • If the wireless access point or router requires password input, tap Password to enter the password.
    • If the wireless access point or router supports the WPS (Wi-Fi Protected Setup™) function, tap Connect using Wi-Fi Protected Setup™, select the connection method, then follow the on-screen instructions.

To connect to an access point you have connected in the past, follow these steps:

  1. On the Wi-Fi screen, tap the Settings button.
  2. Tap Network history to view access points you have connected in the past.
  3. Tap the desired access point.

Troubleshooting and tips: