Article ID : 00148905 / Last Modified : 05/04/2016

Error :Confirm that the Bluetooth is turned on and is close to the Projector. appears on the smartphone display when using it with the Ultra Short Throw projector.

Applicable Products and Categories of This Article

If the message Confirm that the Bluetooth is turned on and is close to the Projector. appears on the smartphone display, check the following:

Check the smartphone:

  • Make sure that the Bluetooth® function of the smartphone is turned on.
  • Check to see if the projector can be controlled with the smartphone.
  • Turn the Bluetooth function off for a few seconds and turn it back on.
  • Place the smartphone closer to the projector.
  • If it is still not working, erase the Bluetooth device pairing information.
  • Pair the smartphone and projector again.

Check the projector:

  • Make sure that the projector is turned on.
  • Check if the projector can be controlled.
  • Turn the Bluetooth function off for a few seconds and turn it back on.
  • If two or more smartphones are used to operate projector, turn off the Bluetooth function of the other smartphone and try again.
  • Use a different smartphone.
  • If no other smartphone is available, reset the projector by pressing and holding the RESET button near the DC IN 19.5V jack on the rear of projector for more than three seconds.