Disable the Demo Mode of the Audio System
IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
Audio Systems may enter the Demo Mode if the unit is powered on for the first time or the unit isn't operated after the power is turned on. To disable the Demo Mode, turn the unit off and press the DISPLAY button repeatedly until the demonstration display disappears. Check your manual if model-specific information is needed to complete any of these steps.
Disable the Demo Mode on Mini Hi-Fi Systems
Model Name |
How to disable Demo Mode |
MHC-GT3 |
|
MHC-GT5D | |
MHC-V5 | |
MHC-V6D | |
MHC-V7D | |
SHAKE-X1D | |
SHAKE-X3D | |
SHAKE-X7D | |
MHC-GT4D |
|
MHC-V44D | |
MHC-V90W | |
MHC-V11 |
|
GTK-XB7 |
|
- Some models have a MODE or Light button that is used to disable the demonstration mode. If your unit has this button, while the stereo system is turned off, press the MODE or Light button until the display disappears or the message Demo mode off appears.
- Depending on your model, there is a PARTY LIGHT button on the unit or the remote control. Pressing that button will disable the Demo Party Light.
- If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.
- For some models, using the buttons on a supplied remote control will not disable the demonstration mode.