The camera displays an error beginning with C, E or System error
The handling differs depending on the displayed error.
C:13:01
Error is displayed when you are using the internal memory
- This error occurs in the internal memory.
- Turn off the camera.
- Turn on the camera again.
Note: If the situation is not improved, format the internal memory after backing up the stored data.
WARNING! There is a risk of data loss. When you format the internal memory, all stored images will be deleted including protected ones.
Error displays when a memory card is used
- This error occurs in the memory card.
- Turn off the camera
- Insert and remove the memory card several times.
- Turn on the camera again.
- Check whether the memory card is supported by the camera. For more details on compatible memory cards, refer to the operating instructions supplied with tcamera.
The error code “C:13:01” may be displayed when you record large amounts of data, such as when recording movies. - Use another memory card.
- If you record and delete images repeatedly, the files on the memory card may become fragmented and the recording may stop automatically.
- After backing up the stored data to your computer, format the memory card with the camera.
WARNING! There is a risk of data loss. When you format the memory card, all stored images will be deleted including protected ones.
System error and Errors that start from C:32, E:41,E:61, E:62 ,E:91, E:92
- When the errors below are displayed
- Turn off the camera.
- Remove the battery pack.
- Attach the battery pack
- After one minute, turn on the power of the camera.
Check the table below for other errors displayed on your camera.
Error Code | Possible Causes |
---|---|
System error | Issue with the hardware |
C:32:01 | Issue with the hardware |
E:41:00 | Issue with Wi-Fi |
E: 61: 00 | Issue of the focus drive |
E: 61: 10 | Issue of the zoom driving part |
E: 61: 30 | Issue of the lens driving part |
E: 62: 02 | Issue of the image stabilization |
E: 62: 10 | |
E: 62: 11 | |
E: 62: 12 | |
E: 62: 20 | |
E: 91: 01 | Issue of the flash unit part |
E: 91: xx | Issue of the flash unit part, battery recognition, etc. |
If the error isn't resolved after following the troubleshooting steps for the corresponding error listed in the table, service may be required. Go to Product Repair.