Applicable Models

This information is for the following models:

  • VPL-VZ1000
  • VPL-VZ1000ES
IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

About this download

Benefits and Improvements from the latest update

  • Improvement on connectivity with Apple TV 4K

Previous Benefits and Improvements

  • Reduces the time it takes an image to appear when switching signal formats
  • Fixes minor performance issues

File Info

Zip File Name

  • sony_pjupdate_2015_6010_pji_auth.zip

File Version

  • Version 6.010

File Size

  • 110 MB (115,814,103 byte)

Release Date

  • 02-19-2019

Before You Start

Your firmware may already be up to date, especially if you have a new projector. If the version number is 6.010 or higher, you do not need to update.

If you're not sure, it's easy to check which version of firmware you have:
Software version can be checked from “information” menu at OSD.

Download & Install

Download and Transfer the Update Folder to Your USB Storage Device

  1. Download the file to a temporary or download directory on your computer.
  2. Extract the update folder from the file. (The original file is compressed)
  3. Connect a USB storage device to your computer.
  4. Transfer the update folder to the root directory of your USB storage device:
    Note: The root directory is the top directory in a file system.
    IMPORTANT: Do not change the name of the folder or copy to any other folder on the USB device.

Updating the System Software

CAUTION: During the update process, do not remove the USB device or turn off the projector.

  1. Power off the projector.
  2. Make sure no other USB device is connected to the projector before starting the update.
  3. Insert the USB storage device containing the update folder into USB port of the projector.
  4. Power on the projector. Update process starts automatically.
    Note: The ON/STANDBY indicator will blink green and then amber during the update process. The update process takes about 5 minutes to complete.
  5. Once the update is complete, the ON/STANDBY indicator will light up red, and the projector will enter Standby Mode.
  6. Remove the USB device.
  7. Power on the projector.
    Note: After the update, the initial power on takes about 15 minutes to light the laser. During this period, ON/STANDBY indicator will blink green and all the fan will spin at high-speed. During the updating process, DO NOT unplug/power off the projector.
  8. Once the projector completely starts and the laser is lit, the update process is complete.
  9. Check the current firmware version to confirm that the update has successfully installed.
    Note: If the version number is latest one, the firmware update was successful.