Applicable Models

This information is for the following models:

  • SRS-ZR7

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

About this download

Benefits and improvements from the latest update

  • Improves secure communication
  • Makes Spotify Connect available to use, even with a free account
  • IMPORTANT: This firmware update must be performed in order to keep using the Chromecast built-in music distribution service. If you do not manually install the update, it will be automatically installed at a time when there is an active network connection available, and the device is not being used.

Previous Benefits and Improvements

  • Improves secure communication
  • Added Voice guidance for Bluetooth pairing mode
  • Supporting Spotify Playback on Chromecast built-in
  • "Wireless Surround" now also supports SCMS-T devices when playing back music via Bluetooth
  • Google Cast for Audio content:
    • Google Multi Room function is now supported
    • Supports the music sources sent from SCMS-T devices via Bluetooth while using the Wireless Stereo/Wireless Surround Function
  • Operation and stability improvements
  • Improving operational stability when playing back music files in USB memory during Wi-Fi connection

File Info

File Name

  • Firmware update 6.05 for SRS-ZR7

File Version

  • 6.05

Release Date

  • 08-06-2019

Before You Start

Check the firmware version

This update utility is not necessary if your personal audio system has already been updated to firmware version 6.05. If you're not sure, it's easy to check which version of firmware you have. There are two ways to do so:

  • How to confirm using "Sony | Music Center (SongPal)" application.
    1. Connect the unit to the same Wi-Fi network as your smartphone, using "Sony | Music Center (SongPal)" application.
    2. Start up "Sony | Music Center (SongPal)" application on your smartphone.
    3. On the "Speaker & Group" screen, select "SRS-ZR7".
      Speaker & Group
    4. Select "Settings".
      Select Settings
    5. On the "Settings" screen, select "Other Settings".
      Settings
    6. On the "Other Settings" screen, confirm the SRS-ZR7 firmware version
      Other Settings
  • How to check using a personal computer.
    1. Connect the unit to the computer with a LAN cable (not supplied).
      Connect with a LAN cable
      Note: Connect the speaker to a computer directly with the LAN cable.
    2. Connect the AC power cord (supplied) to the AC adaptor (supplied). Press the ON/Standby button (ON/Standby) button, to turn the power on.
      Connect the AC power cord
      Note: Wait until the LINK indicator stops flashing and stays lit in pink
    3. Display Sony Network Device Setting on your computer.
      1. Launch a browser
      2. Enter the following URL in the address bar: http://169.254.1.1
        Address bar
  1. Select the language from Language Setup, if it is displayed.
  2. On the "Device Details" screen, the "Firmware Version" (X.XX.X.XX) will be displayed.
    Device Details
    Note: The "Firmware Version", "Model Name", "Device Name", "Connection Type", "Internet Access", "SSID", and "Security Method" are all displayed on this screen.

There are 2 easy ways to update the firmware:

What you needWhy use this method?
Internet / network
***RECOMMENDED***
Wi-Fi
  • An Ethernet cable or a wireless router to connect your SRS-ZR7 to the internet
  • To make sure your SRS-ZR7 is connected to an active internet connection
We recommend this method as it's the easiest and quickest way to update your firmware.
USB storage device
USB Storage Device
  • A computer
  • A USB storage device
Update your firmware this way if you can't connect over the internet.

Download & Install

Internet / network

The software Update is available via internet (network). Please check the following steps.
Note: You cannot update to the latest software, if the set is NOT connected to the internet (network).
Important:

  • Please make sure your unit is connected to a power outlet via the USB AC adaptor before starting the update.

  1. Connect to a power supply outlet. Use the USB AC adapter and supplied micro USB cable to connect the unit's DC IN 5V port to a power outlet.
    Note: the software update cannot be performed when using battery power only.
  2. Connect to the internet (network)
    • Connecting using "Sony | Music Center (SongPal)" application on your mobile device
    • Connecting via Wi-Fi Protected Setup (WPS)
    • Connecting using a computer
      Note: For additional details, refer to the product instruction manual.
  3. If the speaker is turned on, press the ON/Standby button (ON/Standby) button, and turn it off.
  4. Plug the AC power cord connected to the AC adaptor into an AC outlet securely.
    Note: The software update cannot be performed when the unit is only relying on the battery for power.
  5. Press the ON/Standby button (ON/Standby) button to turn the power on.
  6. Wait until the LINK indicator stops flashing and stays lit in orange.
    Note: Whenever a software update becomes available, the "UPDATE/WPS" button will light up.
  7. Tap and hold the "UPDATE/WPS" button until you hear beeps. When the software update starts, the "UPDATE/WPS" button will start flashing.
    Note: The speaker is not operational while updating, and the blinking (interval and condition) of the "UPDATE/WPS" button will change during the update progress.
  8. The "UPDATE/WPS" button turns off and the speaker switches to standby mode or "BLUETOOTH/Network" standby mode automatically after the update is completed.
  9. Check the version by following the steps described under Check the firmware version to confirm the update has been performed successfully.

Questions & Answers

All the function LEDs are lit up?

The software update failed. Press the ON/Standby button (ON/Standby) button to turn off the speaker, then turn it on again.Make sure the speaker is connected to the internet and the "UPDATE/WPS" button is lit, then start updating again.


The UPDATE light remains lit in orange.

The software update failed. You can do the firmware update for personal audio system via USB flash drive.


The ON/Standby buttonindicator flashes in red and "UPDATE/WPS" button flashes in orange.

The software update failed. You can do the firmware update for personal audio system via USB flash drive.


USB

Supported Operating systems:

  • Windows® 10
  • Windows® 8.1 - please use it in desktop mode.
  • Windows® 7 with Service Pack 1 (SP1)
  • Mac OS X (10.6) or later

Recording Media:USB flash: with a capacity of more than 256MB - Operation is not guaranteed for all USB flash drive.

Notes:

  • The number of flashes of the "UPDATE" indicator will change according to the update’s progress. The "UPDATE" indicator flashes four times at first, and decreases by one flash, then turns off when the updating is completed.
  • Keep the speaker connected to the power supply while updating.
  • Do not remove the AC power cord until completing the update.
  • Do not power off the power during the update.
  • Updating normally takes 3 to 10 minutes.

  1. Close all other windows and programs you are running apart from this page.
  2. Read the terms and conditions on this page and accept them by checking the tick box.
  3. Download the firmware update. The file SRS16002.UPG , 150 MB (157,327,552 bytes) will begin downloading.
  4. Save the file to the desktop of your computer.
    Note: If you are using Windows 10 or 8.1 the update file may be saved automatically in the Downloads folder. Click the Desktop tile from the Start screen and find the download file in the Downloads folder by using Explorer.
  5. Copy the update files to the USB flash drive:
    1. Insert the initialized (formatted) USB flash drive into a USB slot on your computer
    2. Copy the UPDATE folder to the USB flash drive.
    USB Drive

Update the audio system via USB:

  1. Connect the speaker to an AC outlet and turn it on by pressing the on/stand button
  2. After the POWER indicator lights green, insert the USB flash drive to USB slot of the speaker.
  3. Press and hold "UPDATE/WPS" button, and immediately tap and hold "FUNCTION" button. Then keep the both buttons pressing for 4 seconds until beeps are heard. When the speaker connects to the network, "UPDATE" indicator might be lit in orange. Even in this case, please operate it.
  4. The USB update starts, the "UPDATE" indicator flashes in orange. Do not operate the speaker during this procedure.
    UPDATE indicator
  5. The "UPDATE" indicator (and Power indicator) will blink several times during the update.
  6. When the update is complete, The "UPDATE" indicator will turn off and the speaker will enters to standby mode or "BLUETOOTH/Network" standby mode automatically.
    Note: When you turn on the speaker for the first time after an update, the "UPDATE" indicator flashes in orange three times.
  7. Check the Firmware version