Applicable Models

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • STR-DA3600ES

About this download

Benefits and improvements

This utility updates the firmware to version 1.022 and provides the following benefits:

Improvements over version 1.020:

  • The SHOUTcast® Internet radio service is no longer a supported feature. At this point it may possible to listen to pre-set stations without performing this update (providing there is no change from the SHOUTcast service). There may be a problem tuning to a new or different station (that is not preset) which may be corrected by performing this update.
    Note: We are unable to guarantee future listening with the SHOUTcast service.

Benefits provided by previous updates and included in versions 1.022:

  • Provides support for the Rhapsody® music service security certificate server update
  • Provides support for the SHOUTcast® Internet radio interface update

System Requirements

Operating Systems

  • Windows Vista®
  • Windows Vista® 64-bit
  • Windows® 7
  • Windows® 7 64-bit
  • Windows® XP
  • Windows® XP MCE

File Info

File Name

  • A36U_1022.zip

File Version

  • 1.022

File Size

  • 17.55 MB

Release Date

  • 03-24-2015

Download & Install


  • A compatible computer with an active Internet connection.
  • Network LAN cable to connect the receiver to the network.
  • Supplied CD with Setup Manager software.
    Note: If you do not have the Setup Manager CD, you can download the Setup Manager application to your computer. Please refer to the Setup Manager installation procedures below for additional details.
  • Supplied remote commander.
  • TV connected to the receiver.

  • The Setup Manager software is required to perform the firmware update. Follow the steps below to install the Setup Manager software on your computer:
    Note: It is not necessary to install the Setup Manager software if you have previously install this utility.
    1. Power on your computer and login as administrator or with an account with administrator rights.
    2. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
    3. Insert the the supplied Setup Manager CD into your CD-ROM drive.
    4. The installation launcher automatically starts and displays the Software Setup screen.
      Notes:
      • If the installation launcher does not start, navigate to the CD-ROM files and double-click the "SetupLauncher.exe" file.
      • If you do not have the Setup Manager CD, download the Setup Manager application to your computer, open the downloaded folder, and then double-click the "SetupLauncher.exe" file.
    5. At the "Welcome to the Software Setup" screen, read the agreement, then, if you agree, click "I accept the terms of the license agreement", and then click "Next".
    6. At the "Software Setup" screen, under "Software" click the Setup Manager icon.

      Setup Manager icon selection.
    7. At the "Software Setup" screen, under "Setup Manager" click "Install".
    8. At the "Welcome to the Setup Manager Installer" screen, click "Next".
    9. At the "Select Type" screen, select "Custom", and then click "Next".
    10. At the "Choose a Destination Folder" screen, click "Next".
    11. At the "Add a desktop shortcut" screen, select "Add a shortcut to the desktop", and then click "Next".
    12. At the "Install the program" screen, click "Install".
    13. At the "Setup Manager was successfully installed" screen, click "Finish".
    14. The Setup Manager software is installed and the Setup Manager icon is placed on your desktop.

  1. WARNING!! Do not power off the receiver or disconnect the network cable during the firmware update process. Doing so may cause may cause a malfunction.
  2. To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  3. Download the A36U_1022.zip file to a temporary or download directory (please note this directory for reference).
  4. Connect the receiver to your network using a network LAN cable.
  5. Ensure the receiver is connected to the TV.
  6. Power on the receiver and wait 30-50 seconds for the U-com communication.
  7. On the remote commander, press the "GUI MODE" button to show "GUI MODE ON" in the display window.
  8. Ensure the TV is powered on. The menu is displayed on the TV screen.

    Note: If your receiver has already been configured to connect with your home network, please skip to step 13.
  9. On the remote commander, use the up/down arrow () buttons to select Settings, Network, Network Setup.

    Network Setup selection
  10. At the "Network Setup" menu, select Internet Setup.

    Internet Setup selection
  11. At the "Internet Setup" screen, select Connect Automatically(DHCP).

    Network Settings DHCP selection
    The message "Connecting... Please wait." may appear.
  12. When the receiver has successfully connected to the network, select "Finish" and press the enter () button.
  13. On the remote commander, press the "GUI MODE" button to display "GUI MODE OFF" in the display window of the receiver.
  14. On the remote commander, press the "MENU" button, then press the up/down arrow () buttons to select "System Settings", and then press the enter () button.
  15. Use the up/down arrow () buttons to select "UPDATE(PC)", and then press the () button.
  16. Use the up/down arrow () buttons to select "PERMIT".
    • IMPORTANT: Do not power off the receiver or disconnect the network cable during the firmware update process. Doing so may cause may cause a malfunction.
    • It may take 30 minutes to complete the update.
  17. On the computer, double-click the Setup Manager icon.
  18. At the "Setup Manager - Select AV Receiver" screen, double-click the icon for your receiver.
  19. At the "Setup Manager" screen, move the scroll bar on the left to select "System".
  20. At the "System Settings" screen, to the right of "File Path", click "Browse" to locate the A36U_1022.zip file.
  21. Click "Start Update".
  22. At the "Start Update" screen, click "Yes" to start the update process. This update takes 15-30 minutes to complete.
    Note: The MULTI CHANNEL DECODING lamp on the front panel of the receiver flashes while the update is in progress. The flashing will disappear after the update is complete.
  23. After the update completes, click "Exit".
  24. Power off the receiver and disconnect from the computer.

The firmware software update is complete.

  1. On the remote commander, press the "GUI MODE" button to display "GUI MODE OFF" in the display window of the receiver.
  2. On the remote commander, press the "MENU" button, then press the up/down arrow () buttons to select "System Settings", and then press the enter () button.
  3. Use the up/down arrow () buttons to select "VERSION x.xxx". This will display the current version information for the receiver.