Article ID : 00269532 / Last Modified : 03/08/2022Print

How to use your Alpha or DSC camera to live stream with the USB streaming function

    The USB streaming feature is available on select cameras and offers enhanced live stream video and audio capabilities. Check your operation manuals to verify compatibility. If USB streaming is not available on your camera, consider using the USB port with Imaging Edge Webcam software or an HDMI connection.

    Before you start

    • .
    • You will need the supplied USB cable or a compatible equivalent.
    • If the camera's power is turned on while the USB cable is connected, then USB streaming will not activate. Disconnect the USB cable, activate USB streaming, and then reconnect the cable.
    • Adjust movie recording settings (focus, exposure, etc.) before activating USB streaming as they apply to the live-streamed video.
    • During USB streaming, power is supplied to the camera from the computer. If you want to conserve computer power, set the USB Power Supply to Off on the camera.

    Setup USB live streaming

    1. Set the camera to a movie recording mode and set the desired exposure, focus, etc.
    2. Activate USB Streaming on the camera:
      • Review the Livestreaming video and audio (USB Streaming) section of the Help Guide for your camera.
    3. Connect the camera to the computer or other device with the USB cable or compatible equivalent.

      Notes:

      • During USB streaming, power is supplied to the camera from the computer. If you want to conserve computer power, set the USB Power Supply to Off on the camera.
      • If USB Power Supply is set to Off and power is supplied from an adapter or a USB Power Delivery device, you must have a sufficiently charged battery in the camera.

    4. Start streaming from your live streaming or web-conferencing service and adjust video and audio settings as needed.
    5. Depending on your camera, do one of the following to exit USB streaming:

      The camera will return to movie mode.

      • Press the MODE button.
      • Press the center of the control wheel.
      • Turn off the power to the camera.
      • Disconnect the USB cable.