Article ID : 00026806 / Last Modified : 01/31/2018

How Do I Reset My Car Stereo?

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    Reset your car stereo under the following conditions:

    • Before you operate your car stereo for the first time.
    • After you replace the car battery.
    • After your change the connections or wiring.
    • If your car stereo malfunctions.

    WARNING! There's a risk of data loss. Performing a the RESET procedure will erase the clock settings and some stored content.

    Some models don't have a reset button. Check your manual for model-specific information.

    Devices with a Reset Button

    1. Remove the faceplate from your car stereo.
    2. Press the RESET button on the front panel using a pointed object, such as ball-point pen.

    Note:

    • These steps are for the in-dash car stereo receivers that have removable faceplates and may vary slightly based on your specific model number.
    • For car stereos that have Bluetooth® wireless features, it would be necessary to perform the BT Initialize procedure to completely reset it.

    Devices without a Reset Button

    1. On the front panel of your car stereo, press the SOURCE/OFF button for more than two seconds.
    2. Turn on your car stereo.