The Netgear® Push 2 TV Adapter model PTV100 is required to use the Intel® Wireless Display or WiDi feature. The adapter only supports the 2.4 GHz wireless frequency.
NOTE: Not all computers have the Intel Wireless Display technology. To see if your computer has it, check the specifications or the supplied operations guide.
The following documentation about the adapter is available:
An image of the adapter:
The adapter has the following connections at the back of the unit:
- Adapter power connector
- Power switch
- HDMI® connector
- Composite video
- Analog audio left
- Analog audio right
- Reset button
NOTE: Display resolution is subject to the media hardware, including but not limited to the cables. Refer to the following maximum resolution capabilities:
- VGA: 2048x1536
- HDMI: 1920x1080