Set up the Wi-Fi Direct feature for 2016 LCD TV models

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

Note: Not all TVs support the Wi-Fi Direc®t feature. Check your TV manuals for model-specific information. Manuals are posted on your model support page.

This information provides the steps to set up the Wi-Fi Direct feature for 2016 LCD TV (non Android TV™ models).

1. Enable the built-in Wi-Fi of your TV:
   1. On the supplied remote control, press the HOME button.
   2. Select Settings.
   3. Select System Settings.
   4. Select Set-up.
   5. Select Network.
   6. Select Built-in Wi-Fi.
   7. Select On.
2. Turn on the Wi-Fi Direct feature of your TV:
   1. Press the HOME button.
   2. Select Settings.
   3. Select System Settings.
   4. Select Set-up.
   5. Select Network.
   6. Select Wi-Fi Direct.
   7. Select On.
3. Display the SSID and WPA key of the TV:
   
   Note: The SSID and the WPA key displayed on your TV are used when connecting a Wi-Fi Direct device to your TV.
   1. Press the HOME button.
   2. Select Settings.
   3. Select System Settings.
   4. Select Set-up.
   5. Select Network.
   6. Select Wi-Fi Direct Settings.
   7. Press the Options button on the TV remote.
   8. Select Manual.
   9. Select Other Method.
      • The SSID (Service Set Identifier) and the WPA (Wi-Fi Protected Access) key will display on the TV screen.
   10. When connecting a Wi-Fi Direct compatible device to your TV, select the SSID of your TV and enter the WPA key displayed on the TV screen as the password.
       • If the connection is successful, the message Wi-Fi device is connected will appear on the TV screen.
       • For details on the device you're connecting to your TV, refer to the manual supplied with that device.