Images from the camera are distorted or undulate (wavy)

This issue may occur while the drone aircraft is hovering or flying at a low speed or if the camera's shutter speed is too high.

• If images from the camera are distorted (undulating) while the drone is hovering or flying at a low speed, the issue may be resolved by adjusting the gimbal parameters. For details, refer to the Airpeak™ website for your gimbal:
  • GBL-T3
  • GBL-PX1
• Images may appear distorted if the camera's shutter speed is too high. Check if the issue is resolved by reducing the shutter speed.
  
  Note: We recommend that you set a shutter speed that is twice the frame rate or less.