Article ID : 00293859 / Last Modified : 05/08/2023Print

The RTK positioning accuracy is low when using the network station

    Check the appropriate settings on the Airpeak Flight app:

    • Make sure that the network station is properly set.
    • Make sure that the internet connection of the mobile device used for the network station setting is stable.
    • Make sure that the remote controller used for the network station setting is linked with the Airpeak drone aircraft.
    • Make sure that the NTRIP server is properly set.
    • Make sure that the NTRIP server supports RTCM3.1, RTCM3.2 MSM3, RTCM3.2 MSM4, RTCM3.2 MSM5, or RTCM3.2 MSM7.
    • Make sure that you don't use a network station that is too far away. Use a network station as close as possible to the flight area.