To update the system software:
You need to download and install the dedicated Airpeak Flight app on your mobile device. The app is available for download on the Apple App Store.
Once the app is installed, connect the mobile device to the remote controller and then connect to the internet. Then, with the aircraft and remote controller connected, perform the operations (steps) listed in the Updating the system software section of the Airpeak Help Guide.
System software release notes:
04/06/2022
| Software version |
- Aircraft (ARS-S1): Ver. 1.0.8 (About 726 MB)
- Remote controller (RCR-VH1): Ver. 1.0.8 (About 362 MB)
|
|
App version
|
- Airpeak Flight: Ver. 1.1.4
|
|
Update content
|
- Improves video transmission quality for when communication status is poor
- Improves the receiver sensitivity display in the controller signal strength display
- Adds a roll adjustment function to the Main control of the gimbal
|
View previous version benefits and improvements
02/28/2022
| Software version |
- Aircraft (ARS-S1): Ver. 1.0.7 (About 800 MB)
- Remote controller (RCR-VH1): Ver. 1.0.7 (About 400 MB)
|
|
App version
|
- Airpeak Flight: Ver. 1.1.3
|
|
Update content
|
- Enhanced warning when the aircraft cannot fly in cold environments
- Improved the stability of stereo camera calibration
- Improved the issue of the aircraft vibrating depending on how the gimbal and camera are installed
- Fixed an issue where Airpeak Flight did not display the aircraft status correctly during manual operation during RTH (Return to Home)
|
11/30/2021
| Software version |
- Aircraft (ARS-S1): Ver. 1.0.6 (About 800 MB)
- Remote controller (RCR-VH1): Ver. 1.0.6 (About 400 MB)
|
|
App version
|
- Airpeak Flight: Ver. 1.1.1
|
|
Update content
|
- Improves flight safety and warnings for aircraft issues
|
11/16/2021
|
Software version
|
- Aircraft (ARS-S1): Ver. 1.0.5 (About 800 MB)
- Remote controller (RCR-VH1): Ver. 1.0.5 (About 400 MB)
|
|
App version
|
- Airpeak Flight: Ver. 1.1.0
|
|
Update content
|
- Improves an issue where video transmission quality may deteriorate in dual operation mode under certain conditions
- Fixes an issue where geofences are not accurately represented under certain conditions
- Supports initialization of the aircraft and remote controller (Airpeak Flight Ver. 1.1.0 or later is required)
|
