KP-48V85

Programming Codes

Select the brand name from the drop-down list for each device for which you want to see codes.
If your device brand is not listed, try the codes listed for other brands.

Cable Box
DVD Player
Digital Satellite receiver
Laser Disc Player
VCR

Follow these steps to program the remote control.

To control a VCR, DVD or laser disc player:

  1. Turn on the VCR, DVD or laser disc player.
  2. On the remote control, move the VTR1 2 3 DVD/MDP switch to 1, 2 or 3 for a VCR or DVD/MDP for a DVD or laser disc player.
  3. Press the CODE SET button.
  4. Press the FUNCTION DVD/VTR button.
  5. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  6. Press the ENTER button.
  7. Point the remote control at the component.
  8. Press the DVD/VTR power button to verify operation.

To control a cable box or digital satellite receiver:

  1. Turn on the cable box or satellite receiver.
  2. Press the FUNCTION SAT/CABLE button.
  3. Press the CODE SET button.
  4. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  5. Press the ENTER button.
  6. Release the CODE SET button.
  7. Point the remote control at the component.
  8. Press the SAT/CABLE power button to verify operation.