KP-65WS500

Programming Codes

Select the brand name from the drop-down list for each device for which you want to see codes.
If your device brand is not listed, try the codes listed for other brands.

Cable Box
DVD Player
Digital Satellite receiver
Television
VCR

Follow these steps to program the remote control.

To control a VCR or DVD player:

  1. Turn on the VCR or DVD player.
  2. Open the panel of the remote control.
  3. On the remote control, move the slide switch to the desired component type, AV1, AV2, AV3 or DVD.
  4. Press the CODE SET button.
  5. Close the panel.
  6. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  7. Press the ENTER button.
  8. Open the panel.
  9. Point the remote control at the component.
  10. Press the POWER button to verify operation.

To control a cable box or digital satellite receiver:

  1. Turn on the cable box or satellite receiver.
  2. Open the panel of the remote control.
  3. Press the CODE SET button.
  4. Close the panel.
  5. Press the FUNCTION SAT/CABLE button.
  6. Using the number pad, enter the manufacturer code for the component. Note: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.
  7. Press the ENTER button.
  8. Point the remote control at the component.
  9. Press the SAT/CABLE power button to verify operation.