Sony SupportSRS-XB33

Article ID : 00020874 / Last Modified : 10/13/2020Print

How to pair the speaker system with a Bluetooth® wireless device.

    1. Turn on the speaker system.
    2. Set the Bluetooth function of the Bluetooth device to On.
    3. Press and hold the PAIRING button on the system until the blue Bluetooth indicator begins to flash quickly.

      NOTE: The pairing mode of the speaker system is cancelled after approximately 5 minutes, and the blue Bluetooth indicator light turns off. If the pairing mode is cancelled while performing this procedure, start over from step 3.

    4. Perform the pairing procedure on the Bluetooth device to detect the system.

      NOTE: For details, refer to the operating instructions supplied with the Bluetooth device.

    5. Select SRS-BTD70 shown in the display of the Bluetooth device.

      NOTES:

      • Some devices cannot display a list of detected devices
      • If SRS-BTD70 does not appear on the list of display devices, repeat from step 2.
    6. If a Passcode input is being required by the Bluetooth device, use the code 0000.

      NOTE: Passcode may be called Passkey, PIN code, PIN number, or Password.

    7. The Bluetooth connection is completed and the blue Bluetooth indicator on the system stays on.