- If your issue is with using your TV remote to control your set-top-box (cable box, satellite box, etc.) or A/V receiver, check the Can't control the set-top box or A/V receiver when I use the IR Blaster function article for additional information.
- If an error is displayed when a button is pressed on the remote control that is related to network services such as YouTube™ videos or Netflix® movies, check whether the TV is connected to the internet correctly. For more details, refer to the Connect the TV to the internet and troubleshoot problems article.
Top tip - our quick recommended solution
Before continuing to the various troubleshooting steps, we recommend that you remove the batteries from the remote control, then press and hold the Power button for three seconds. Wait at least a minute, then reinsert the batteries according to the polarity (+ and -). If the issue continues, continue with the troubleshooting suggestions provided.
Check the remote control operation after each step.
Check your TV
Make sure that the buttons on your TV work. If they do, skip the steps below and troubleshoot the remote control instead. If the TV buttons don't work, follow the instructions in this section.
- Check that the light (power/standby/activity light) on the TV is on.
Note: Depending on the model, the location and shape of the light vary.
- If the light is on or blinking in red, proceed to the next step.
- If the light isn't on, check the AC power adapter or power cord to make sure it isn't unplugged or loose. If there is no issue with the connection, proceed to the next step.
Note: A no-light condition isn't always an indicator of no power. If the light isn't on, check if the light comes on when pressing various buttons on the remote control. Some models are set by default to only light up when using the remote. It's also possible on some models for the user to select a light (Illumination LED) setting in Device Preferences to not come on at all.
- Remove external devices (external USB hard disk, devices connected with HDMI cable, etc.) and cables from the ports on the TV to confirm if a connected device may be causing the problem.
- Do not remove the TV power cable.
- If connections are complicated, make note of them, and then make sure that you can reconnect everything before you start disconnecting devices or cables.
- If the light flashes when a specific device is connected, the connected device may have a problem.
If the TV buttons still do not operate the TV, the TV may require repair.  Go to Product Repair.
Check your remote control
Check the remote control operation after completing each step.
- Press each button on the remote control twice to make sure none of the buttons are stuck.
- Clean the battery terminals with a cotton ball, or soft cloth dipped in a small amount of rubbing alcohol.
- Replace old or used batteries with new ones.
- Make sure to insert the batteries with the + and - in the correct positions.
- Do not use a new battery and a used battery, or different brands of batteries together.
- Do not use a rechargeable battery.
- Perform a power reset.
If the issue is caused by an external factor, such as network service, data broadcasting, or connected devices, it may be improved by a power reset.
- For Android TV™ or Google TV™ models, unplug the power cord, wait two minutes, and then plug it in.
- For other TV models, refer to the How do I power reset my LCD / LED or Projection TV article.
- For Android TVs or Google TVs, symptoms may improve by updating the software of the remote control. Refer to the How to perform a TV remote control software update article to check whether there is a software update for the remote control.
- If the issue still occurs, more troubleshooting is available according to the remote control type.
Note: Steps vary depending on if your remote control is Infrared (IR) or wireless. Most TV remote controls are IR. If your remote control does not have the IR mark, refer to the Wireless or Touchpad Remote Control instructions.
- Troubleshoot the Infrared Remote Control
- An IR mark identifies an Infrared remote control and is usually located at the bottom part of the remote, near the model number.
- Troubleshoot the Wireless or Touchpad Remote Control
- Troubleshoot the Infrared Remote Control
If you followed the steps above and still experience the issue, the TV may require repair or the remote control may need to be replaced.  Go to Product Repair.