Article ID : 00085688 / Last Modified : 05/02/2024Print

Software update doesn't complete using the TV menu

    Various factors like connection and server errors may prevent the television from completing the software update from being downloaded properly from the website. In addition, downloading a software update requires a stable high-speed internet connection. A poor internet connection may result in a delayed or failed update.

    Follow the steps below to troubleshoot the issue and attempt to perform the software update after completing each step.

    Step 1: Perform a power restart or reset of the TV

    Power restart

    Power reset

    Step 2: Troubleshoot the network connection

    1. If you need to determine your TV model type, refer to the How to check if your BRAVIA™ TV is a Google TV™, Android TV™, or other TV article.
    2. Confirm the network status of the television. For details, refer to the Performing a Network Diagnosis section in either of the following articles: After performing a Network Diagnosis, make sure that all items of the Connection results display as OK or Found.

    For certain TVs released in 2019 or before, the Automatic software download setting will allow the TV to automatically download new updates while in standby mode. If your TV has the Automatic software download setting, try turning the setting to On. For details on how to turn on the Automatic software download setting, refer to the following:

    Note: This feature is not available on Google TVs.

    For Android TVs

    For other than Android TVs

    3. Use a USB flash drive to install the update

    and save it to a USB flash drive, then install it on your TV.