If the Wi‑Fi® signal on your Android TV™ device drops or intermittently disconnects, check your network connection status and troubleshooting.
The Network Settings icon or messages on the TV menu screen indicates your TV network connection status. How it appears depends on the Android™ OS version installed on your TV. Check the version installed on your TV and then follow the applicable steps below.
Check Your TV Network Status
Check the network status on your TV and then, if necessary, follow the suggested steps in the troubleshooting section below.
- The Wi-Fi signal strength is weak
Place the router close to your TV, then check if the signal strength has improved.
- Your TV is too close to the router
It is recommended that the TV and router be at least 1 meter (3 feet) apart.
- Other devices are connected to the same network
If other devices are downloading large-sized files, such as videos, the network speed may slow down. Cancel or wait until this activity completes and try again.
- Restart your TV and reset your router
- Power reset or restart the TV
- To reset the router, check your router manual for instructions or disconnect power for at least one minute, then reconnect power and wait for the router to complete it's connection to the internet.
- Interference from other wireless devices
- If multiple wireless devices or electric equipment, such as microwave ovens, are used at home, it may affect the Wi-Fi performance of your TV. Power off these devices when not in use, or keep them away from your TV.
- Electromagnetic interference may also occur depending on the location of the TV. If possible, change its location and check if the performance improves.
Devices that may Cause Electromagnetic Interference Environments that may Cause Electromagnetic Interference
- Microwave ovens
- Cordless phones
- Garage door openers
- Wireless toys
- Locations near large transmission lines
- Locations that generate static electricity
- Locations where the walls, decks, or doors have metal surfaces
- Check the frequency band setting of your router (for dual band routers)
Some routers support multiple frequencies (ex: 2.4 GHz, 5 GHz), if your router supports this feature, try a different frequency.