Article ID : 00114593 / Last Modified : 04/03/2025Print

How do I restart or power reset my Android TV or Google TV?

    IMPORTANT: This article is for Android TV™ and Google TV™ models only. If your TV is not an Android TV or Google TV, refer to How do I power reset my LCD / LED or Projection TV? article.

    You can use the TV remote control or TV menu to perform a restart or unplug the TV power cord and plug it back in to perform a power reset.

    Before you start

    Your BRAVIA TV runs the Android™ OS, which is also used in many smartphones and tablets. As with these devices, resetting your TV is an effective method to resolve some issues, such as the picture doesn't appear, only sound being output, the remote control doesn't work, or the App running slowly.

     

    Restart or Power reset your TV

    Note: Disconnect all external USB storage devices from the TV before restarting.

      Restart

      Select the method depending on your TV

      1. Using the supplied remote control:
        • Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears.

          Note: Depending on the model and OS, the Cancel or Restart screen may appear after pressing the POWER button on the remote control for 3 seconds or longer. In that case, you can also select Restart to restart.


          Illustration of a remote control pointing at a TV's power button.
          • 1: Illumination LED/status LED
          • 2: Remote control POWER button
        • The TV should restart automatically. Wait for approximately one minute, and the TV will turn back on. If it doesn't reboot, press the POWER button on the remote control to turn it on.
          TV restarting automatically

          The TV restart is complete. Check to see if your issue has been resolved.

      2. Restart using the TV menu. Depending on your TV and using the remote:
        • Press (Quick Settings)SettingsSystemRestartRestart
        • Press HOMESettingsAboutRestartRestart
        • Press HOMESettingsDevice PreferencesAboutRestartRestart

      Power Reset (unplug the TV power cord)

      Note: Skip this step if your TV power cord is inaccessible.

      If you unplug and plug in the power cable, it may have the same effect as the reset steps above. If the situation does not change after pressing the POWER button on the remote control, try the following steps. If you leave the TV with the power cord disconnected, the electricity that remains in the unit will be discharged. As a result, unnecessary data and error information in the memory will return to their defaults and allow you to use the TV again normally.

      1. Turn off the TV.
        Note: The location of the power button on the TV varies by model. It is commonly found on the underside of the TV in the center or on the back, either on the left or right side. For details, refer to your TV manual.
        Diagram showing common locations of the TV power button
      2. Unplug the television power cord from the electrical outlet.
      3. Press the power button on the TV, and release it
      4. Let the television remain without power for 2 minutes.
      5. Plug the power cord back into the electrical outlet.
        Plugging the TV power cord into an electrical outle

      Note: For some Google TV models, the following alternative method has the same effect: On the TV, press the POWER button for about 40 seconds or until the TV turns off.

      If the issue is not resolved, check the BRAVIA TV Troubleshooting Guide article.