Full Specifications & Features
Size & Weight
- Dimensions (W x H x D)
- 295mm x 51mm x 199.5mm
- Weight
- 2.7kg (Approx.)
Amplifier
- Channel Configuration
- 4.1-ch, 6-ch
- High Pass Filter
- Variable: FRONT(500-4kHz), REAR(50-500Hz)
- High Pass Filter Slope
- 12dB/oct
- Low Pass Filter
- Variable: REAR(500-4kHz), SUBOOFER(50-500Hz)
- Low Pass Filter Slope
- 12dB/oct
CTA Rated Output Power
- 4 ohms
- 45W×4 (FRONT/REAR), 90W×2 (SUBWOOFER)
- 4 ohms - BTL (Bridge-tied Load)
- 350W (SUBWOOFER) at 1kHz
Rated Output Power (14.4V)
- 4 ohms
- 45W×4 (FRONT/REAR), 90W×2(SUBWOOFER)
- 4 ohms - BTL (Bridge-tied Load)
- 350W (SUBWOOFER) at 1kHz
Maximum Output Power (1 kHz)
- Max. Channel Configuration at 4 ohm BTL (Bridge-tied Load)
- 600W (SUB)
- Max. Channel Power Configuration at 2 ohms
- 300W×2 (SUB), 1100W×1 (SUBWOOFER Bridged )
- Max. Channel Output Power Configuration at 4 ohm
- 100W×4 (FRONT/REAR), 200W×2 (SUBWOOFER)
General Features
- Frequency Response
- 20-20 kHz (FRONT/REAR) 20-10kHz (SUBWOOFER)
- Tolerance
- +0.5/-3dB
- Signal to Noise Ratio
- Rated Output:100dB / CTA Rated Output:83dBA(FRONT/REAR), 80dBA(SUBWOOFER)
- Total Harmonic Distortion at 1 kHz (%)
- Less Than 0.08%
Details
- Speaker Level Input
- Line In / High Level(Speaker Level) Input
- MOSFET
- Output Stage / Power Supply
- Subsonic High Pass Filter
- No
- Bass Boost: Frequency (0 - 10 dB)
- Yes
- Line In: Input Sensitivity
- 0.3-6V (6ch Input mode only)
- Gold Plated Connectors
- Yes
- Current drain (A) - rated output power at 4 ohms
- 36A
DSP Functions with Sony l Music Center App
- Time Alignment
- Yes (4.1ch)
- Equalizer
- Yes (10-band)
- Balance/Fader
- Yes
Bluetooth® Specifications
- Version
- 3.0
- Secure Simple Pairing
- Yes
- Profile
- A2DP, AVRCP
Bluetooth® General Features
- Voice Control
- No
- Microphone
- No
- Device Name
- XM-GS6DSP
- Auto-paring for iOS Devices
- No
- Sony | Music Center (iOS)
- Yes
- Sony | Music Center (Android™ )
- Yes
- Siri Eyes Free Mode
- No
What's In The Box
- Connectors :Line In (RCA conversion) Connector x 1, High Level Input Connector x 1
- Manual:Yes
Features
Time Alignment optimises sound for every seat
Wherever you sit in your car, you’ll be closer to some speakers than others, which affects how the music sounds. Time Alignment re-calibrates the signal so you’re always in the correct sound field for a more natural listening experience.
Customisation at your fingertips
Pair your smartphone with the XM-GS6DSP and take charge of the sound. Adjust equaliser and speaker settings, volume levels and fader controls from the comfort of your seat with a simple touch of your smartphone screen.
Stream the music you love
Unleash your tracks and playlists. Stream music to your car stereo from all of your favourite apps with BLUETOOTH® wireless connection.
Power meets precision
With 6 channels of class-D amplification, the XM-GS6DSP drives a variety of speaker configurations. Fill your car with 45Wx4 (4Ω) of clean and dynamic sound plus 600W (2Ω bridged) of subwoofer power. All from a compact amp, with minimal interference for audio that’s crystal clear, even at its loudest.
Premium components
High quality electrolytic capacitors at power input and output stages provide responsive bass. Premium inductors with low resistance OFC wire cut RF noise for a rich, lively sound.
Heavy duty aluminium case
A sturdy, heat sink-integrated aluminium case protects the amp during your drive, preventing unwanted vibrations so music stays stable and true.
Low and high pass filters
Highly customisable low and high pass filters can be applied across the system, allowing you to drive component high frequency tweeters and subwoofers, plus everything in between, all from the same amp.
Precision meets versatility
Install your amp under a seat or in the boot, then connect to your existing car radio. Select from a variety of speaker configurations to complete your new audio system, with easy set up to drive subwoofers and component speakers, as well as regular coaxial speakers.