Article ID : 00010366 / Last Modified : 07/23/2019

How do I enable the Intel Virtualization Technology (Intel VT) in the BIOS utility?

    Follow these steps to access the BIOS and enable the Intel® Virtualization Technology (Intel VT).

    IMPORTANT: Not all VAIO computers support Intel VT. Before using the procedure below verify your computer supports Intel VT .

    1. Turn off the computer.
    2. Turn on the computer.
    3. At the VAIO screen, press the F2 key.
    4. In the Setup Utility screen, press the right-arrow key until the Advanced tab is selected.
    5. On the Advanced tab, press the down-arrow key until Intel(R) Virtualization Technology is selected and then press the Enter key. Image
    6. Press the down-arrow key to select Enabled and then press the Enter key.
    7. Press the right-arrow key until the Exit tab is selected.
    8. Press the down-arrow key until Exit Setup is selected and then press the Enter key.
    9. In the Save & Reset screen, verify Yes is selected and then press the Enter key.

      NOTE: The computer will restart automatically.