Article ID : 00013356 / Last Modified : 06/15/2016

An Audio System is not registered message appears on the Google TV screen.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

This message occurs if the AMP button on the keypad remote control is activated and no audio system is connected or setup to operate with the Google TV™ device. A red dot will illuminate on the AMP button when it is activated. If you do not have an audio system connected, simply press the AMP button to deactivate it.

If you do have an audio system connected, you first need to set the Google TV device to control the audio system by selecting AV Receiver in the Settings menu.

Follow these steps if an audio system is not connected and toggling the AMP button does not remove the error message from the screen:

  1. On the keypad remote control, press the Fn+1 buttons to enter the Settings menu.
  2. Press the down arrow button to select Picture and Sound.
  3. Press the ENTER button.
  4. Press the down arrow button to select Speakers.
  5. Press the ENTER button.
  6. Press the up arrow button to select TV Speakers.
  7. Press the ENTER button.