Article ID : 00018466 / Last Modified : 05/04/2015

How to perform a system recovery using the VAIO Care version 7 software.

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

The VAIO Care™ version 7 software can be used to restore the computer to the original factory software configuration. Follow the procedure below to run a system recovery:

WARNING: There is a risk of data loss. All data, settings, and programs added to the computer will be deleted. During this procedure you will have a chance to back up your data. Sony does not guarantee your personal data can be backed up and restored properly.

IMPORTANT:

  • Before performing a recovery, check for software and driver updates. Downloads are posted on your model support page.
  • This model does not require Recovery Discs. Recovery data is included on a special partition of the hard drive. That said, it is highly recommended to create a set of Recovery Discs .
  • It is possible to create your own Recovery Media on most computers. Instructions can be found in your product manual.
    Sony Electronics is no longer permitted to sell system recovery media for VAIO PCs that shipped with operating systems released prior to Windows 7.
      If your computer shipped with the Windows 7 operating system (or later), a Recovery Media Kit can be purchased through Encompass Supply Chain Solutions at https://sony.encompass.com or 1-866-779-5153.
      If your computer shipped with any operating system released prior to the Windows 7 operating system, please contact Best Buy for VAIO PC repair and recovery options at 1-800-433-5778.

  • If the operating system will not start and no other troubleshooting can be performed, a system recovery can be performed by starting the computer and pressing the F10 key.
  • It is recommended to connect the AC adapter to the computer so power is not interrupted.
  • Disconnect all external devices, such as printers, network cables, cameras, external hard drives or flash drives.
  1. Make sure the computer is powered on and press the Assist button.

    NOTE:If your computer does not have an Assist button on the top of the keyboard, click Start, then click All Programs.

  2. In the All Programs menu, click the VAIO Care folder and then click VAIO Care.

    NOTE:If prompted for an administrator password or a User Account Control prompt is displayed, type the appropriate password, or click Yes.

  3. In the VAIO Care application click Advanced Tools. Image
  4. Click Recovery & Restore. Image
  5. Click Recover Computer. Image
  6. Click Yes to proceed with the Recovery. Image

    NOTE: The computer will restart.

  7. In the VAIO Care Rescue window, click Start recovery wizard. Image
  8. In the Do you need to rescue your data? window, click Yes, I'd like to rescue my data.

    NOTE: If you do not have any data on your computer that you need to back up, click the Skip Rescue button and proceed to step 15.

    Image
  9. Connect an external storage device to the computer, such as a USB hard drive or thumb drive.
  10. In the Select Rescue type window, click Easy rescue.

    NOTE: If you would like to manually select files to back up, click Custom Rescue and then follow the on-screen instructions.

    Image

    NOTE: The software will automatically detect your data.

    Image
  11. Click to select the drive where you would like to back up your data and then click the Next button.

    NOTE: This screen displays the amount of disc space required and the amount of free space on the external drive.

    Image
  12. In the Confirm options and start rescue window, click the Start Rescue button. Image

    NOTE: A progress window will show the status of the backup.

    Image
  13. In the Rescue has completed successfully window, click the Next button. Image
  14. In the Are you sure you want to start recovery? window, click to select Yes, I'm sure and then click the Start Recovery button. Image

    NOTE: A status window is displayed indicating the progress of the different applications. No action is required. This process may take up to 2 hours and the computer may restart several times.

    Image
  15. In the Recovery complete window, click the Restart button. Image

    NOTE: The computer will restart.

  16. Follow the on-screen instructions to set up the operating system and complete the system recovery.