Article ID : 00028000 / Last Modified : 02/15/2018

How to reset the LocationFree TV back to the factory settings.

Applicable Products and Categories of This Article

IMPORTANT: Do not remove the AC power adapter and the battery during the monitor initialization.

  1. On the top of the monitor, press the INDEX button. Image
  2. On the menu, tap the TV button.
  3. In the TV window, tap the center of the screen.
  4. In the TV window, tap the Settings button.
  5. In the Settings window, tap the Basic button.
  6. In the Settings window, under Settings, tap the Initialize button.
  7. In the Settings window, under Settings, tap the Clear All button.

    WARNING: There is a risk of data loss. By continuing with this procedure, all data and settings will be reverted to the initial factory settings.

  8. On the base station, turn off the power by pressing the POWER switch.
  9. On the back of the base station, press and hold the CLR CFG button. Image
  10. While holding the CLR CFG button, press the power switch on the front of the base station.
  11. Continue to press the CLR CFG button until the NetAV indicator on the front of the base station turns off.

    NOTE: If this procedure is completed successfully, the NetAV indicator will turn red and then turn off. Image

  12. On the monitor, in the Settings window, under Settings, tap the OK button.
  13. In the Initialization starts window, under Make sure that the base station has already been initialized., tap the OK button.

    NOTE: The monitor will be automatically rebooted during the initialization.