Article ID : 00082492 / Last Modified : 07/23/2019

How to setup the IR Blaster to control the connected set-top-box.

    Follow the steps below to set the IR blaster:

    1. Using the supplied remote control, press the HOME button.
    2. Select Settings.
    3. Select Channels & Inputs.
      Settings
    4. Select IR Blaster.
    5. Select Set-Top-box.
    6. Select Next and press the right arrow button.

      IMPORTANT: Make sure the IR blaster is connected to the USB port on the TV, and the other end is placed near the remote sensor of the set-top-box.
    7. Enter your ZIP code and select OK.
    8. Select the name of your service provider.

      NOTE: A TV signal should be shown on the test screen.

      IR Blaster 5
    9. Test if the remote can control the set-top-box by following the on-screen instruction.

      NOTE: You will be asked to provide additional information to determine the channel lineup.