Article ID : 00201039 / Last Modified : 08/27/2018

Information About Using Your Portable Bluetooth Speaker

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

This page provides information on how to set up, use, and care for your EXTRA BASS™ Portable Bluetooth® Speaker.

Pair Your Speaker with a Bluetooth Source Device

VIDEO: Connect Your Speaker to a Bluetooth Source

  1. Set your speaker to pairing mode.
    • On your speaker, press and hold the button until the indicator flashes rapidly.
      • Your speaker powers up in pairing mode if no paired devices are present.
  2. Turn on the Bluetooth function of the device you want to connect.

  3. On your source device, select the model name of your speaker.
    • After the Bluetooth connection is established, the indicator becomes steady.

Connect the Speaker Using One Touch NFC

VIDEO: Connect Your Speaker Using NFC™ Technology

Touch the NFC-compatible devices to your speaker to pair and connect them.

  1. Turn on your speaker.
  2. Set the NFC function of your mobile device or Walkman player to ON.
  3. Touch your mobile device or Walkman player to the NFC logo on your speaker.

  4. Follow the on-screen instructions to complete the connection.
    • After the Bluetooth connection is established, the Bluetooth indicator switches from flashing to steady.

Use the Party Booster Feature

VIDEO: Using the Party Booster Feature

  1. Turn on your speaker.
  2. Turn on the Party Booster function.

    There are three ways to turn it on:

    Use the Music Center app.

    Use the buttons on your speaker.

    Tap your speaker's body.

  3. Tap the top, front, both sides, or bottom of your speaker.
    • Sound effects come out of your speaker and the lights turn on.
    • Tapping the top, front, both sides, and the bottom surfaces of the speaker generates different sound effects.
    • A stronger tap increases the volume of the sound effects.

Connect Multiple Speakers With the Wireless Party Chain Feature

VIDEO: Using the Wireless Party Chain Feature

  1. Set all speakers that you want to connect within one meeter (three feet) of each other.
  2. Set up your first speaker.

  3. Connect a second speaker.

  4. Connect more speakers.

  5. Play music on the first speaker so that it plays back on all the connected speakers.

Clean Your Speaker

Clean foreign substances as soon as possible. Otherwise, it may cause the water-repellent fabric part to become discolored or deteriorate and lead to speaker malfunction. Follow this maintenance procedure to clean salt, sand, and other foreign substances from the water-repellent surface of your speaker:

  1. Make sure that the rear cap ① on the back of the speaker is completely closed.

    Rear Speaker Cap

  2. Wash your speaker in fresh water (tap water, etc.) to remove foreign substances.
    • The speaker is not resistant to water pressure. Don't perform this step using high water pressure, such as in a shower.

  3. Wipe any remaining water off of the surface using a soft, dry cloth.

  4. Put your speaker on a soft, dry cloth with the logo facing down to drain any collected water inside your speaker.
    • The sound quality may change if water enters the speaker section of the system. This isn't a malfunction.

  5. Place your speaker in a well-ventilated location until it dries completely.

Note:

  • Don't use a vacuum cleaner to remove sand or other foreign substances.
  • Don't use detergents, thinner, benzene, alcohol, or other chemicals on your speaker.
    • It may affect the water-repellent treatment of the fabric part of your speaker and damage it.
  • Don't leave your speaker in cold places.
    • Moisture on your speaker may cause it to freeze and malfunction.