Article ID : 00203082 / Last Modified : 04/19/2019

Use the Google Assistant function for your wireless headphones

Applicable Products and Categories of This Article

IMPORTANT: This article applies only to specific products and/or operating systems. Check the Applicable Products and Categories section of this article before starting these steps.

You can perform the following operations when you press the following buttons on your headphone. If model-specific information is required to complete each step, check your manual. Manuals are posted on your model support page.

WI-1000X NC/AMBIENT button location
NC/AMBIENT location on WI-SP600N model
NC/AMBIENT location on WH-1000XM2 model
Power button location on WF-1000X model
  • Voice command input
    1. Press and hold the button.
    2. Speak while holding down the button.
    3. Release the button after speaking and Google Assistant will operate.
  • Cancel the voice command input
    • Press the button twice.
  • Notification read-out