Article ID : 00229158 / Last Modified : 07/08/2020

No sound from the Soundbar connected to the HDMI ARC port of the TV when the Control for HDMI function is off

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    If the Control for HDMI function of your Soundbar is off, sound may not be output depending on your TV model. To turn on the Control for HDMI function follow the steps below:

    HT-X8500 / HT-S350/SD35

    • On the remote control, press and hold the VOICE button for five seconds.
      You can check the status of the indicators as follows:

      Control for HDMI On/OffHT-X8500HT-S350 and HT-SD35
      Control for HDMI is OnHDMI and BLUETOOTH indicators flashBLUETOOTH indicator flashes twice
      Control for HDMI is OffDolby ATMOS and DTS:X indicators flashBLUETOOTH indicator flashes once

    HT-G700

    1. On the remote control, press the MENU button.
    2. When SPEAKER is displayed, select HDMI.
    3. Select CONTROL FOR HDMI.
    4. Select ON.
    5. Press the MENU button to exit the menu.
    • If you want to output sound with the Control for HDMI turned off, connect the TV and Soundbar using an HDMI cable and an optical digital cable. Check the Connecting a TV section of the Startup Guide of your Soundbar for more information. Manuals are posted on your model support page.